Announcement
Collapse
No announcement yet.
rattle from left side
Collapse
X
-
tbirdhd
when using the click pen spring , one i am finding are shorter ! do you leave them as is or give them a little tug ??
-
I haven't stretched any, but I dont see how it would hurt anything.MY BIKES..1977 GS 750 B, 1978 GS 1000 C (X2)
1978 GS 1000 E, 1979 GS 1000 S, 1973 Yamaha TX 750, 1977 Kawasaki KZ 650B1, 1975 Honda GL1000 Goldwing, 1983 CB 650SC Nighthawk, 1972 Honda CB 350K4, 74 Honda CB550
NEVER SNEAK UP ON A SLEEPING DOG..NOT EVEN YOUR OWN.
I would rather trust my bike to a "QUACK" that KNOWS how to fix it rather than a book worm that THINKS HE KNOWS how to fix it.
Comment
-
SVSooke
Hmmmm ....my 85 GS750 has developed a rattle to.Sounds like it comes from the left side.Changes slightly when I pull in the clutch but doesn't go away.Starts up just fine.Starter clutch or clutch hub?
Comment
-
If it changes when you squeeze the lever it is most likely the hub nut working loose. Starter clutch just spins at the same rate as the crank regardless if the lever is in or out...so the lever wouldnt have an effect on a starterclutch.MY BIKES..1977 GS 750 B, 1978 GS 1000 C (X2)
1978 GS 1000 E, 1979 GS 1000 S, 1973 Yamaha TX 750, 1977 Kawasaki KZ 650B1, 1975 Honda GL1000 Goldwing, 1983 CB 650SC Nighthawk, 1972 Honda CB 350K4, 74 Honda CB550
NEVER SNEAK UP ON A SLEEPING DOG..NOT EVEN YOUR OWN.
I would rather trust my bike to a "QUACK" that KNOWS how to fix it rather than a book worm that THINKS HE KNOWS how to fix it.
Comment
-
SVSooke
You'd think I'd hear it on the right side then,this defiantly sound like it's on the left side.Maybe the sound's coming though the pushrod?
Comment
-
Sound traveling down the crank..and sometimes it even sounds like its dead center of the crank. Do this... Take a screwdriver and put the handle into your ear and lay the shaft on the bike in different spots. Basically your making a poor mans engine stethascope.MY BIKES..1977 GS 750 B, 1978 GS 1000 C (X2)
1978 GS 1000 E, 1979 GS 1000 S, 1973 Yamaha TX 750, 1977 Kawasaki KZ 650B1, 1975 Honda GL1000 Goldwing, 1983 CB 650SC Nighthawk, 1972 Honda CB 350K4, 74 Honda CB550
NEVER SNEAK UP ON A SLEEPING DOG..NOT EVEN YOUR OWN.
I would rather trust my bike to a "QUACK" that KNOWS how to fix it rather than a book worm that THINKS HE KNOWS how to fix it.
Comment
-
SVSooke
Comment
-
MY BIKES..1977 GS 750 B, 1978 GS 1000 C (X2)
1978 GS 1000 E, 1979 GS 1000 S, 1973 Yamaha TX 750, 1977 Kawasaki KZ 650B1, 1975 Honda GL1000 Goldwing, 1983 CB 650SC Nighthawk, 1972 Honda CB 350K4, 74 Honda CB550
NEVER SNEAK UP ON A SLEEPING DOG..NOT EVEN YOUR OWN.
I would rather trust my bike to a "QUACK" that KNOWS how to fix it rather than a book worm that THINKS HE KNOWS how to fix it.
Comment
-
adam
When I was told about the click pen spring I went around the house and looked for a bunch of clickers and just took them apart and found one that was the same length of the spring on the starter clutch then went and bout a pack of that same brand and style. I thought about stretching the one that didn't seem to be long enough but after stretching it and letting it sit over night I found that the shorter ones actually seemed to shrink back to their original size, so I nixed that idea. Also after reading my Clymer manual I did realize that the stator is in oil. I was thinking that the oil in there was bad, at least it was for the bike I was working on last year. Maybe I should read up on things before ordering parts, at least I will have an extra now....
Comment
Comment