Problem is after searching the web and Suzuki's sources some of these gears are no longer available.
I'm currently trying to source these transmission parts for a 1981 GS850 G shaft drive bike.
The microfiche numbers are as follows.
24250-45102 gear 5th drive
24231-45104 gear 3rd drive
24240-45100 gear 4 th drive
24310-45100 gear 1st driven
24341-45100 gear 4th driven
24331-49202 gear 3rd driven
24351-45104 AA discontinued part
24320-45102 gear 2nd driven
24141-45102 shaft outer counter.
The problem that has haunted me over a while is that the gear section where the shift tongue sits has worn, and this binds both the gear & tongue and stops the bike shifting up gears. The gears show signs of oil starvation on the main cluster with heat build up.
The complete motor has been stripped, and the dealer has offered to fix it for $1800, labour included. But this also means I have to try and source some of the reduntant gears.
Two things worry me, 1st is that if I source all new gears is that going to fix the problem and put strain on the old shaft parts.
2nd, if I use a used cluster in good condition does the problem just arise further down the track.
Any advice would be welcome.
Cheers.
Comment