Announcement

Collapse
No announcement yet.

Oil pan stuck? (83 TSCC 16V 750 w/oil cooler)

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #16
    I used a dead blow hammer once, you can get a bit more rougher with one of those then you can with a steel head ball peen. A couple good solid whacks should do the trick.
    sigpicMrBill Been a GSR member on and off since April 2002
    1980 GS 750E Bought new in Feb of 1980
    2015 CAN AM RTS


    Stuff I've done to my bike 1100E front end with new Sonic springs, 1100E swing arm conversion with new Progressive shocks installed, 530 sprockets/chain conversion, new SS brake lines, new brake pads. New SS fasteners through out. Rebuilt carbs, new EBC clutch springs and horn installed. New paint. Motor runs strong.

    Comment

    Working...
    X