.png "Powered by vBulletin")
Will an 85 1150 crank work? I know it requires different pistons with 18 mm wrist pins, but what else?
-
1981 GS 1100e turbo, 83 motor, turbo pistons, new head, new turbo, backed and welded clutch basket, Dyna S ignition, cbr 929 front end, gsxr 750 rear end with 190 tire, all carbon fiber covered bodywork. -
I believe that they are 20mm wrist pins. Ask Chef1360 (or something like that) on this site as he just did one. -
it's a bolt in john but you will need the 1150 basket also because it has 2 more teeth than your 1100 basket.
plus 1150's are 20mm small ends on the rods.
oh course the 1150 has/uses all large taper SC parts which is a plus!Comment
-
Whatever crank you use, have it converted to straight cut gears. The power you can reach with that turbo is too much for the helical basket.Comment
-
Not sure if you need anymore but I have a set of lightly used 1166 Mtc turbo pistons in a box somewhere,billet straight cut baskets with 750,1100&falicon gears and tons of 1150 blocks heads etc.Last edited by Guest; 10-17-2014, 08:32 AM.Comment
Comment