Announcement

Collapse
No announcement yet.

V&H 4-1 exhaust stud length for '81 GS1100EX

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    V&H 4-1 exhaust stud length for '81 GS1100EX

    Looking for the correct length for M8 x ?mm with 1.25 thread pitch for the 1981 GS1100EX w/ Vance & Hines 4-1.

    Read quite a few posts with searches on "exhaust" etc... 50mm was mentioned, however no indication of which exhaust system was used,

    Also, I saw a post that stated one should consider using 2 exhaust pipe gaskets per cylinder. I have P/N 26-1083 from Dennis Kirk (Vesrah) shown below...

    dk261083.jpg
Working...
X