82 GS1100E crankshaft fitment

[Guest]

This may already be questioned, but what crankshafts would fit into the 82 1100E with using the same starter clutch/ flywheel set up. I read on here that is possible to use the 83 1100E crank, but I would have to get all the components for the 83 crank. I'm just looking to replace my stock crank, will the GS1100 G GL cranks fit? Thanks for any and all advice. Any one have one for sale in the Tennessee Georgia area?

[blowerbike]

no shaft cranks fit.
80-86 1100/1150 all interchange.
80-82 has small taper left side so if you install an 83 and up crank you need all the larger taper parts.

added
with an 1150 crank you need the 1150 basket as it has 2 more teeth than the 1100 basket.
and.......2 mm larger wrist pins/pistons for the 1150 crank.