Announcement

Collapse
No announcement yet.

Swingarm troubles

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Swingarm troubles

    I'm trying to get the swingarm off of my 1980 550E and I've run into some difficulty. I've removed the rear wheel and was able to get the large axle like nut out with a punch and drift. Now I can't seem to find anything else that's holding the swingarm in place however I can't remove it from the frame. Is there another nut or something that needs to be removed.
    Thanks for the help,
    Nick

    #2
    Brake stay arm and chain guard are a couple bits that come to mind. Make sure you have the rear brake system out of the way so you're not hanging up on lines. Aside from that a little love with a nylon dead blow hammer will probably get you there.

    Comment

    Working...
    X