.png "Powered by vBulletin")
1980 gs1100E transmission issue
Bike has 30,000 miles. Started getting a noticeable clank when pulling away from stop and during each upshift. I thought was chain slap but it was proper tension. I put the bike on center stand and when I put in gear the bike started badly shaking, worse with each gear. I took off the clutch side cover. The clutch sleeve hub rocks back and forth when the bike is in gear. Is it supposed to do this? What next? I have a video of what the sleeve hub is doing if you want to email me. I can't get it to upload on this site.
-
-
Does your basket have groves like this?
Just an example of a bad basket, not meant to be exact as yours.
GSRick
No God, no peace. Know God, know peace.
Eric Bang RIP 9/5/2018
Have some bikes ready for us when we meet up. -
Put the video on youtube, photobucket, etc.Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-ResurrectionComment
-
I get nothing but an empty photobucket page.GSRick
No God, no peace. Know God, know peace.
Eric Bang RIP 9/5/2018
Have some bikes ready for us when we meet up.Comment
-
Still nothing.GSRick
No God, no peace. Know God, know peace.
Eric Bang RIP 9/5/2018
Have some bikes ready for us when we meet up.Comment
-
Cleared my cookies, logged out of GSR and Photobucket and tried it in another browser and it's working on my end. Not sure why your not seeing itOriginally posted by gsrick View PostComment
-
-
It's working now. There is going to be some free play without the pressure plate, springs, friction plates and discs installed, but I'm not sure if that's excessive. The springs on the backside of the basket shouldn't effect that either, since they work on the primary gear and wont do anything without the other clutch components mentioned above. Where exactly is the noise coming from? Could the dampeners in the rear hub be shot?
If they are worn down or broken like these, it may feel like the chain is slack.GSRick
No God, no peace. Know God, know peace.
Eric Bang RIP 9/5/2018
Have some bikes ready for us when we meet up.Comment
-
The noise is from the transmission area. I checked for the rear wheel hub slop but there is none.Comment
Comment