Announcement
Collapse
No announcement yet.
Skipping?
Collapse
X
-
Skipping?
I feel like once in a while, if I'm in a high gear and kind of lugging a little, it seems like the shaft or something has a skip. anybody ever have something similar? I changed the gear oil, the rear was filled to the threads, the front was filled until oil was seen about to seep out of the check screw. this is all correct levels right?Tags: None
-
Forum LongTimerGSResource Superstar
Past Site Supporter
Super Site Supporter- Mar 2006
- 35619
- Torrance, CA
Your bike has one of the soft rear wheel driven splines. When it starts to slip if just lets go though.
Could you describe in more detail what a "skip" is?Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection
-
I have also had a chain drive bike do this, it just comes out of gear for a split second and back in. I think maybe whoever put the transmission together didn't get some shim in there right.
Hopefully it's the spline as Ed suggests. Easier fix, but it seems a bad spline would let go at high RPM in a low gear and full throttle, not lugging around in a tall one.Last edited by tkent02; 08-17-2015, 09:59 PM.
Comment
-
jprice90
Just when I'm in too high of a gear, and lean into it a little it just seems like it has a slight skip. not popping out of gear or anything, it's weird but I'm thinking if its a trans problem or driveline it would be all time. Maybe its the oil?
Comment
-
"I feel like once in a while, if I'm in a high gear and kind of lugging a little, it seems like the shaft or something "
there is a shock absorbing mechanism in secondary drive unit that could give you this skipping sensation under lugging.1981 gs650L
"We are all born ignorant, but you have to work hard to stay stupid" Ben Franklin
Comment
-
jprice90
I might actually have a slight misfire, it hiccups a little if im just rolling through a turn and slowly get into the gas again, have to figure out what that is
also, what is tolerable gear shfit noise? I have some noise shifting down and up, mind you I never had a shaft driven bike before, I don't know whats good and whats not, basically everytime I shift I hear a clunk
Comment
Comment