Announcement
Collapse
No announcement yet.
1979 GS550 Possible valve issue?
Collapse
X
-
1979 GS550 Possible valve issue?
I recently acquired a 79 GS500 from a gentleman that rode it to work and everything was fine then got on it at the end of the day and it would only kick over half to 3/4 of the way and would not start. So far I have removed the valve cover to see if there was anything blatent but to no avail. Any ideas of a possible cause? I'm leaning towards a valve issue because you can feel it touching something when you slowly kick it over. Thanks for the helpTags: None
-
I would remove the plugs and see if fuel found it's way in to a cylinder or two. Check that the oil level hasn't gone up and doesn't smell of petrol from the filler. For cranking remove the ignition cover and get a ring spanner on the large head and turn the motor slowly by hand.97 R1100R
Previous
80 GS850G, 79 Z400B, 85 R100RT, 80 Z650D, 76 CB200
-
craighotrod
-
Forum LongTimerGSResource Superstar
Past Site Supporter
Super Site Supporter- Mar 2006
- 35619
- Torrance, CA
Check the newbie mistakes thread linked in my signature for a list of some things to watch out for.Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection
Comment
Comment