Announcement

Collapse
No announcement yet.

1979 GS550 Possible valve issue?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    1979 GS550 Possible valve issue?

    I recently acquired a 79 GS500 from a gentleman that rode it to work and everything was fine then got on it at the end of the day and it would only kick over half to 3/4 of the way and would not start. So far I have removed the valve cover to see if there was anything blatent but to no avail. Any ideas of a possible cause? I'm leaning towards a valve issue because you can feel it touching something when you slowly kick it over. Thanks for the help

    #2
    I would remove the plugs and see if fuel found it's way in to a cylinder or two. Check that the oil level hasn't gone up and doesn't smell of petrol from the filler. For cranking remove the ignition cover and get a ring spanner on the large head and turn the motor slowly by hand.
    97 R1100R
    Previous
    80 GS850G, 79 Z400B, 85 R100RT, 80 Z650D, 76 CB200

    Comment


      #3
      I didn't think of that possibility thanks for the reply I'll give it a shot

      Comment


        #4
        Check the newbie mistakes thread linked in my signature for a list of some things to watch out for.
        Ed

        To measure is to know.

        Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182

        Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846

        Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf

        KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection

        Comment

        Working...
        X