are they supposed to be flush with base of cylinder or pushed into groove?
Announcement
Collapse
No announcement yet.
o rings for pistons
Collapse
X
-
o rings for pistons
Can anyone tell me how far in the o rings go into grove on cylinder for gs 1100e?
are they supposed to be flush with base of cylinder or pushed into groove?Tags: None
-
Forum LongTimerGSResource Superstar
Past Site Supporter
Super Site Supporter- Mar 2006
- 35640
- Torrance, CA
Doesn't matter. I'd just make sure they are relatively evenly inserted into the groove. They are to keep oil from wicking up between the aluminum and the steel liner.Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection
-
Fancool
Oh now it makes sense.
That's good news.
Bad news 1 piston ring broke in half and the spring ring popped out on #4 piston.!
How hard is it to replace?
Comment
Comment