Announcement

Collapse
No announcement yet.

Sprocket whine

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Sprocket whine

    Thanks for all the info on carbs new problem front sprocket sheered 2 of 3 screws no oem replacement went with jt and spacer looks like it lines up good torqued nut to specs new chain now slight whine from that area

    #2
    Put your bike/model/year in your signature. How did this happen?
    Did you check alignment of rear wheel/sprocket?
    1981 gs650L

    "We are all born ignorant, but you have to work hard to stay stupid" Ben Franklin

    Comment


      #3
      Proper chain tension? 20-30 mm of movement at the center point of the chain between the sprockets?
      :cool:GSRick
      No God, no peace. Know God, know peace.

      Eric Bang RIP 9/5/2018
      Have some bikes ready for us when we meet up.

      Comment


        #4
        Might seem obvious but are the new chain and sprockets all the same pitch? 530? 520? 630?
        2@ \'78 GS1000

        Comment


          #5
          Originally posted by steve murdoch View Post
          Might seem obvious but are the new chain and sprockets all the same pitch? 530? 520? 630?
          Good question. We had a set come off ebay at the shop I work at, that had the wrong manufacture make for the front sprocket. Right size, but wrong shaft hole and splines, so a goof is possible. Humans do make mistakes.
          :cool:GSRick
          No God, no peace. Know God, know peace.

          Eric Bang RIP 9/5/2018
          Have some bikes ready for us when we meet up.

          Comment

          Working...
          X