Any suggestions for replacing Final Bevel gear on Gs1100G shafty?? Discontinued.

[Guest]

Any suggestions for replacing Final Bevel gear on a GS1100 G shafty?? Part 24911-49001 Final bevel gear set Discontinued. Only need the first one (smaller) that sticks out of the front of the gear case. Checked ebay, probably have to try and find a used final gear case. Tip snapped off, probably to many push starts.

[AMK]

Was it just the threaded tip that snapped or the spline as well?

[Nessism]

That gear part is available NOS via an ebay seller...http://www.ebay.com/itm/24911-49001-...tWaayd&vxp=mtr

Swapping in a new/used final drive unit would be way easier and cheaper than fixing your old one.

This one from an 850 is same as yours, and the seller claims it's off a 10k mile bike. Price is cheap enough too...http://www.ebay.com/itm/1980-Suzuki-...FUvoLS&vxp=mtr

[deepseadiver84]

Ed,Thanks again for all your efforts!

[deepseadiver84]

Alan, Looks like it snapped right at the base of the of the splines just before where the threads start.

[deepseadiver84]

Ed, Yes i found that ebay part last night and messaged the dealer to verify part with a better picture, but I am def. leaning to buying the whole housing.. as you said, way easier!
Dan