Announcement

Collapse
No announcement yet.

help piston to bore clearance

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #16
    Originally posted by cornishgs View Post
    Greg T what cruisin image pistons did you fit and what clearance.
    GS1000 and they finished up with .0025in clearance. They did not appear to be microgrooved either...

    The 650 is quite a bit smaller in the bore so I'd go with the top end of their recommendation - but again, that clearance figure needs to be measured cold.

    Comment

    Working...
    X