Announcement
Collapse
No announcement yet.
What a stud!
Collapse
X
-
What a stud!
Well 3 actually. I struggled all day to remove the cylinders from my 850. Finally, I decided to go to the hardware store to get some jam nuts to pull the 3 studs. It worked! These were 3 of the inner studs, and the holes were just jammed full of crud. It actually took about 10 minutes each to get the studs out of the holes on the bench. No way were the cylinders going to come up over those studs.https://drive.google.com/open?id=0B9zH8w8Civs8ejBJWjdvYi1LNTg&resourcekey=0-hlJp0Yc4K_VN9g7Jyy4KQg&authuser=fussbucket_1%40msn.com&usp=drive_fs
1983 GS750ED-Horsetraded for the Ironhead
1981 HD XLH
Drew's 850 L Restoration
Drew's 83 750E ProjectTags: None
-
520eek
Good to hear that you had success on your first obstacle...hopefully if any more arise you can find an easy solution right here as many others have!
Cheers!
Comment