Announcement

Collapse
No announcement yet.

82 GS1100 eventually dies at idle

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #16
    Update: Seemed to be a combination of the fuel/air mixture screws needing to be richer like a poster had mentioned, and also a little bit vacum related as it seemed to run better when adding a little grease to the carb intake boot o rings. The screws holding the carb intake boots also seemed to require little to no effort to torque loose so I was sure to put some extra umph in when re installing them.


    Thanks to all!! No more issues with idle when at a traffic light, etc.

    Comment

    Working...
    X