gasket models

[timebombprod]

which gs do i have? it has 17 bolts on the valve cover. i need a oil pan gasket and theres 2 variations that are the same part number, and then i need the gasket for the cover on the right side of my engine, i thought it was called the ignition case but i cant find it on the oem parts, its the one u take off for doing a valve adjustment

[steveb922]

I haven't checked the fiche, but it's likely that the two sump gasket numbers relate to the same part - probably a superseded number - so either will fit. The ignition cover gasket isn't vital, as no fluids are contained in there. It's more of a dust seal. You could make one out of a cereal packet. You've already noted the most important difference in the 17-bolt valve cover.

[Rich82GS750TZ]

The term you're looking for is Crankcase Cover. See parts fiche at partsoutlaw.com or other. Page I liked has left and right engine cases/gaskets.

The Oil pan gasket in on the Oil Pump-Oil Filter Page, and appears to have 17 holes, all bolt sizes called out on the image at the bottom.

[timebombprod]

The term you're looking for is Crankcase Cover. See parts fiche at partsoutlaw.com or other. Page I liked has left and right engine cases/gaskets.

The Oil pan gasket in on the Oil Pump-Oil Filter Page, and appears to have 17 holes, all bolt sizes called out on the image at the bottom.

the crankcase cover looks like the one on the left i have the one on the right side thats just a circle off

[Steve]

i need a oil pan gasket and theres 2 variations that are the same part number, ...

Take a GOOD look at the description on the parts fiche.

See where one of them says "GASKET -E.NO.136328" and the other one says "GASKET E.NO.136329-"?

The "E.NO." part of that is for your ENGINE NUMBER.

Look at the serial number of your engine and order accordingly.

Apparently they have superceeded that gasket into one number that handles both, so order either one.

.