Announcement
Collapse
No announcement yet.
Base gasket #^%$##
Collapse
X
-
These were scrap aluminum latch bases in the bin at work. What i saw was grind one side and make wedged for loosening the cylinders.....
MY BIKES..1977 GS 750 B, 1978 GS 1000 C (X2)
1978 GS 1000 E, 1979 GS 1000 S, 1973 Yamaha TX 750, 1977 Kawasaki KZ 650B1, 1975 Honda GL1000 Goldwing, 1983 CB 650SC Nighthawk, 1972 Honda CB 350K4, 74 Honda CB550
NEVER SNEAK UP ON A SLEEPING DOG..NOT EVEN YOUR OWN.
I would rather trust my bike to a "QUACK" that KNOWS how to fix it rather than a book worm that THINKS HE KNOWS how to fix it.
-
It's the choice of aluminum that makes it right. Same hardness as the aluminum cylinder case, so not much chance of marring/gouging the surfaces.1982 GS1100G- road bike
1990 GSX750F-(1127cc '92 GSXR engine)
1987 Honda CBR600F Hurricane
Comment
-
Wedges bore the brunt of it. Few super tiny dimples at the seam but nothing to worry about as far as the contact surface was concerrned. It s fine.MY BIKES..1977 GS 750 B, 1978 GS 1000 C (X2)
1978 GS 1000 E, 1979 GS 1000 S, 1973 Yamaha TX 750, 1977 Kawasaki KZ 650B1, 1975 Honda GL1000 Goldwing, 1983 CB 650SC Nighthawk, 1972 Honda CB 350K4, 74 Honda CB550
NEVER SNEAK UP ON A SLEEPING DOG..NOT EVEN YOUR OWN.
I would rather trust my bike to a "QUACK" that KNOWS how to fix it rather than a book worm that THINKS HE KNOWS how to fix it.
Comment
-
Originally posted by chuck hahn View PostWedges bore the brunt of it. Few super tiny dimples at the seam but nothing to worry about as far as the contact surface was concerrned. It s fine.sigpic 82 gs1100ez 1168 Wiseco,Web .348 Cams,Falicon Sprockets,Star Racing Ported Head,1mm o/s Stainless Valves,APE Springs,Bronze Guides,etc.APE Billet Tensioner,36CV Carbs,Stage 3 Dynojet,Plenum w/K&N filter,Trued,Welded,Balanced,Crank w/Katana rods & Billet left end, FBG backcut trans, VHR HD Clutch basket,APE nut,VHR High volume oil pump gears,1150 Oil cooler,V&H Megaphone header w/Competition baffle,Dyna S,Coils,Wires,etc.Other misc.mods.
Comment
Comment