Announcement

Collapse
No announcement yet.

LED Lights

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    LED Lights

    Hey I just converted my GS1150, to LED stop and tail lights, I should of took some pictures of the process it didnt take to long, basicly I took out my rear light unit choped out the bulb holders with my dremal, and wired three led lights,from walmart, they are 2 led bulb red marker
    (VERY BRIGHT) $6.99 canadian each.
    The center is the tail light and brake is on either side, I mounted them, on a peice of 1/8 Aluminum and then attached to the rear of the original light unit with self taping screws
    soldered all connections and heatshrinked the joints
    Ive got enough room to run signals in the rear light as well
    Ill take some pictures

    TISS cool

    #2
    ...so you're going to disassemble it all and start over, just so we can see the whole process ... right?

    Sounds like a nice mod! Will look forward to seeing the pics!

    Steve 8)

    Comment


      #3
      I put the turn signals on my 1150 in the tail light with just regular bulbs...I had problems passing NY state inspection like that..It passed after much discussion.
      EULC ON

      Comment


        #4
        heres a animation of it working

        Comment


          #5
          that's prety cool.

          I bet you could win the prize for most annoying avatar if you used that animation....

          Comment


            #6
            good IDEA

            Comment


              #7
              I like that the lights are so hyperactive and jerky!! That'll get their attention! :-)

              Comment


                #8
                I added this to the back of my Valk and my wifes V Star. Best $100 I ever spent. Doubles your lighting with absolutely no modifications what so ever.

                Not affiliated blah blah blah just a happy customer.




                2 small rings of LEDS go into your turn signal housing and get wired into the brake and turn signals. When your lights come on the LEDS come on in your turn signal houseing to act as red rear running lights. When you applly the brakes they brighten just as a dual element bulb would. When you turn on a turn signal that side goes out as the turn signal bulb lights.

                Comment

                Working...
                X