polishing Clutch Cover Case

[KEITH KRAUSE]

From my experience, clearcoating takes away quite a bit of the shine. That's why I only apply wax to mine. Polishing is work but I'd rather do that than sit on the couch munching chips.
For what it's worth, my latest Eastwood magazine came in and on the cover they claim to have a clearcoat that doesn't diminish the shine of polished aluminum. Check out their website and see what you think.

https://www.eastwood.com

If you try it and it works, pass it on. That would be a glorious day!

[BriTXbike]

I would have to agree with you Keith and I may just strip the piece and leave it as is since I finished the the piece with Mothers. What kind of wax do you finish it with?

Were you referring to the Product Zoop in the catalog? I found it searching online and it looks like it might work but rather expensive.

[KEITH KRAUSE]

I would have to agree with you Keith and I may just strip the piece and leave it as is since I finished the the piece with Mothers. What kind of wax do you finish it with?

Were you referring to the Product Zoop in the catalog? I found it searching online and it looks like it might work but rather expensive.

Yes. It's called Zoop seal. I didn't bother to note the cost but it's not permanent either. They claim it lasts for two years. I generally polish about twice a year so it may be worth it by saving you time but I'll just stay with what I'm doing for now. Might be a good "birthday gift" to try though for the man who already has everything?
As far as I've seen, any good wax will work. Waxing will help the shine last longer between polishing.
Be prepared for the work if you want the shine to be at its best. Even in my drier climate and parked in the garage with blankets every night, I need to polish roughly twice a year. Otherwise, cloudiness starts. My drill mounted buffs get to about 90% of the work, the rest is the 'ol fingers.

[Hoomgar]

I would have to agree with you Keith and I may just strip the piece and leave it as is since I finished the the piece with Mothers. What kind of wax do you finish it with?

Were you referring to the Product Zoop in the catalog? I found it searching online and it looks like it might work but rather expensive.

Yes. It's called Zoop seal. I didn't bother to note the cost but it's not permanent either. They claim it lasts for two years. I generally polish about twice a year so it may be worth it by saving you time but I'll just stay with what I'm doing for now. Might be a good "birthday gift" to try though for the man who already has everything?
As far as I've seen, any good wax will work. Waxing will help the shine last longer between polishing.
Be prepared for the work if you want the shine to be at its best. Even in my drier climate and parked in the garage with blankets every night, I need to polish roughly twice a year. Otherwise, cloudiness starts. My drill mounted buffs get to about 90% of the work, the rest is the 'ol fingers.

Wow! Hats off to you mate! Never gonna happen. I'll opt for a stock sealed finish that I can wash once a year during my bike washing ritual. I'll admit to being lazy Lazy LAZY!!!!! when it comes to cleaning my bikes or cars. I guess I am not old enough yet

I ride ride ride, and then wipe off the bulk with a rag and discard it. Clean only as needed. Then get dirty :twisted:


I do truly admire and even envy you guys who have what it takes to do this. Your bike is your reward. Very nice Keith.

[KEITH KRAUSE]

Thanks Mark. Polishing isn't that big a deal to me, or keeping the bike sharp. I don't know if this makes any sense, but doing cosmetic work is something that's not too technical and you can actually relax doing it. And unlike some maintenance work, you get to see the results and feel good about it. The payoff for the labor is worth it and it helps make the bike different from others.