Announcement

Collapse
No announcement yet.

1979 GS750E Rear Fender Removal

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    1979 GS750E Rear Fender Removal

    I purchased a 1979 GS750E a month ago in really good shape. It wasn't running very well at first, however a spark plug change perked it right up. I began tearing it down last night for cleaning/painting. The tank, side covers, seat and front fender were no problem, however I had a little problem with the rear fender ( or at least the upper painted part in front of the taillight ). I did not have a long time to try to figure out how it came off, but I thought someone in the forum here might be able to save me some time tonight???

    BTW...Love the site and this forum.

    #2
    If the 1979 is the same as a 1977 there should be two or three small nuts underneath the fender that thread onto some studs from the fiberglass tailpiece. Use some WD-40 or Liquid Wrench on them because they often corrode and will break or strip easily.

    Comment

    Working...
    X