Ceramic Coating----avail. in Black?

[Mysuzyq]

Hi Guys,
Anyone know if ceramic coating can be done in black? My black headers/muffler are greying a bit... I have only seen pics. of the silver-finish c.coating on the net. Anyone tried it with the GS? I understand they cut down the amount of heat radiated from the headers, in addition to looking good.
Thanks,
Tony.

[Billy Ricks]

http://www.cermakrome.com/Exhaust.htm

[Mysuzyq]

Hey Billy,
Thanks!
Tony.

[Anonymous]

Jet Hot can also do Red and Blue afaik. I was going to get my trucks header done in blue to somewhat match the paint.


-=Whittey=-

[Mysuzyq]

Jet Hot can also do Red and Blue afaik. I was going to get my trucks header done in blue to somewhat match the paint.


-=Whittey=-

Thanks Whittey! I checked out their site last night....unfortunately they don't have a branch up here in Canada.....I hear their prices are also quite high (good quality product though).....it would be prohibitive for me after adding shipping back & forth across the border, etc., esp. considering the shape of the Canadian Peso lately!
Thanks anyway!
Tony.

[Anonymous]

Tony,
If you look in the technical forum you will find this post http://www.thegsresources.com/_forum...pic.php?t=5197.

Take a look in there and you will find a couple of places that will do the job in Southern Ontario.

Roman.

[Mysuzyq]

Tony,
If you look in the technical forum you will find this post http://www.thegsresources.com/_forum...pic.php?t=5197.

Take a look in there and you will find a couple of places that will do the job in Southern Ontario.

Roman.

Hey Roman,
Thanks a lot...its strange, I came across the Fireball site this evening while doing more research on the subject. I also came across Datec Coating (not sure of the url; check it out through Google search)...they are located in Milton & claim to have cost effective product thats easily applied & rival the quality of the more expensive stuff available.....I am begining to wonder if its not better to find a local paint shop that will shoot the pipes with Datec or Cermachrome, which will probably save a few $$...I suppose we will have to prep the headers with sandblasting or somethng ourselves, before bringing it to them though.
Anyway thanks, & do let me know how you make out!