My prescious two girls.

[Cyg]

She got her third mod tonight I am so proud of her. I took her up to the local gas station and one gal, says hey what kind of harley is that. lmao.

I think she was a blonde cause she didnt read the tank.

Anyway from ebay, A brand new K and S Tombstone light. I can't wait too give her, her new signals when they come in. She will shine, shine, shine.



The other lady in forground recieved her last can of rattle paint yesterday. Now she has too cure.



I did realize something, I don't like painting, at all.

[J_C]

Cool! I've been waiting to see what a tombstone would look like on an L fender. How hard was it to get it flush and wired up?

[riskadh]

I like the color as I am in the process of painting my fairings and gas tank forest green myself \\/ . I like the tail light, where did you get it? My tail light lens is broken and I've been looking for a different look on it. In any case, lookin good :-D

[Cyg]

actually it wasnt hard at all. You have three wires on ur stock light. Brown. white and black/white. The light has two wires, Red and Black,

I cut off the stock light and stripped the wires. the light has a rubber boot with it. So use that as a template too drill out your holes so you can attach it. I used a hole sizer thing, it makes holes bigger the further you drill the bigger the hole. Now take the brown from the bike, attach it too the black wire on the light. White too Red. Take the Black/white wire and put crimp with a ring on it. This is your ground and you want your screw that attaches the ligtht too the fender too make contact with that.

Then screw it on. you now have running lights. and a brake light.


The green is emerald jewel green from dupli color. has shiny sparkles in it.

The light you can get from denniskirk or ebay. I got mine from ebay and searched using chrome too get this one. but the model said k and S.

[beby99]

That actually looks cool....can you post some side pics of that light?

[luc8421]

"hole sizer thing" = stepped or tapered drill. FYI

[QuaiChangKane]

"hole sizer thing" = stepped or tapered drill. FYI

Uni-Bit, even.



Nice looking light, Cyg.




-Q!

[Cyg]

thanks. yep its called a uni bit. I love em

[ron bayless]

thanks. yep its called a uni bit. I love em

That looks really great.are your saddlebags rigid sided? how are they attached to the seat frame?

[Cyg]

the saddles are from ebay they have the middle leather part that is sewn together, I took a punch and tied leather straps too them on each corner. I then take my side pegs and stand them out. The side pegs keep the bags from buring or touching the pipes. The leather straps are then wrapped around the frame and the sissy bar. I then took blocks of wood for the flaps and then used special screws in them too keep them rigid. Ill take some pictures tomorrow too show you.

[ron bayless]

the saddles are from ebay they have the middle leather part that is sewn together, I took a punch and tied leather straps too them on each corner. I then take my side pegs and stand them out. The side pegs keep the bags from buring or touching the pipes. The leather straps are then wrapped around the frame and the sissy bar. I then took blocks of wood for the flaps and then used special screws in them too keep them rigid. Ill take some pictures tomorrow too show you.

great! you bikes look really great.

[Cyg]

Ok here is the new arrow stalker light setup on one side. These are from Drag specialists. Clear lens with amber bulbs

Red wire on signal goes too black on bike. Black / White wire goes too ground or b/w wire on bike. No need to make the screws longer either, I just used washers and the same bolts. I get lots of flex with the rubber rings. This is fun stuff too do on your daily ride. I should of thought of this sooner, but was takeing too much time on my chopper. I like this better actually. hehe credits go too this forum for staying alive and being strong again.

Now they work.

For saddle bags
I took a piece of Gis Plywood sanded good one side. then used speed screws with a larger head and screwed them down. As you can see the leather straps hold the bags in place. (made my own holes). The blocks of wood keep the bags shape. Make sure you fasten one block of wood the side of the bag. otherwise they tend too fall in into the bag and loose thier appreance of stiffness.

[Cyg]

another mod to the gs 1100

Finally got my stalkers from Dennis Kirk. I threw em on tonight, I like em what do you all think. I am getting the tank painted coblat blue in two weeks by a professional. whoo hoo.





Think I need new hand grips??

[ron bayless]

Finally got my stalkers from Dennis Kirk. I threw em on tonight, I like em what do you all think. I am getting the tank painted coblat blue in two weeks by a professional. whoo hoo.





Think I need new hand grips??

i CANT SEE THE HANDGRIPS.BUT ALL THE STUFF YOU HAVE DONE LOOKS GREAT.

[Cyg]

they are those donkey skull ones, I got em from the hatley swap meet last year.

I want too show off my Second Girls new look
I put the old signals from the Gs 1100 on her, and I found a nice set of glasses from the Iola vintage jap bike meet for twenty bucks. I then painted them up too match the tank and covers.

I rode her around today and I like the way she looks. I need new mirrors tho eh?