Announcement
Collapse
No announcement yet.
GS1000 streetfighter idea w/ picture
Collapse
X
-
8trackmind
Originally posted by 80GS1000 View Post
-
80GS1000
There's a small, triangular piece of thin steel plate welded in the V of the subframe on both sides of the frame. A bolt runs through the upper bolt hole of the rearsets, through a hole drilled in the small bit of plate steel, which is then secured with a nut on the other side. This reinforces the adapter plates.
The bottom two bolts on the adapter plates go into the stock footpeg mounting holes.
Now we just need some prettier looking bolts than those fugly 8.8 metric hex heads...
If you have any questions, shoot.
Comment
-
YoshiJohnny
-
kwickkwack
New guy here:-D I would go with the white striping on top of it.
I can attest to the Silverstar bulbs they are awesome.I have a set of them I used on a GSXR with dual lights before.Before I sold the bike I changed the bulbs to the oem style.
I've been looking at an older GS (81) with 1150 motor with big bore and all the rest of those goodies\\/With some luck she will be mine.
Mike
Comment
-
80GS1000
I'm kinda diggin' this Japan-only GSX1400 fairing instead of the original GS1000S fairing - might look better with the USD forks. The shades of blue and white look good too. Whaddya think?
Comment
-
solo suzuki
Originally posted by 80GS1000 View PostI'm kinda diggin' this Japan-only GSX1400 fairing instead of the original GS1000S fairing - might look better with the USD forks. The shades of blue and white look good too. Whaddya think?
you'll also notice that the paint design is less busy than on the original
Comment
-
Forum LongTimerGSResource Superstar
Past Site Supporter- Oct 2006
- 13946
- London, UK to Redondo Beach, California
Don't givi do one similar to that??
Dan1980 GS1000G - Sold
1978 GS1000E - Finished!
1980 GS550E - Fixed & given to a friend
1983 GS750ES Special - Sold
2009 KLR 650 - Sold - gone to TX!
1982 GS1100G - Rebuilt and finished. - Sold
2009 TE610 - Dual Sporting around dreaming of Dakar..... - FOR SALE!
www.parasiticsanalytics.com
TWINPOT BRAKE UPGRADE LINKY: http://www.thegsresources.com/_forum...e-on-78-Skunk/
Comment
-
Forum LongTimerGSResource Superstar
Past Site Supporter- Oct 2006
- 13946
- London, UK to Redondo Beach, California
Maybe I was thinking of this... http://cgi.ebay.com/ebaymotors/ws/eB...MEWA:IT&ih=011
Or perhaps it was a Shoei.....
Personally I like the Maier one, Dennis Kirk sells them.
This is what's going on mine for the Yosemite trip.... http://cgi.ebay.com/ebaymotors/ws/eB...m=300180442489 not as nice as the maier in my opinion but it fits!!
Dan1980 GS1000G - Sold
1978 GS1000E - Finished!
1980 GS550E - Fixed & given to a friend
1983 GS750ES Special - Sold
2009 KLR 650 - Sold - gone to TX!
1982 GS1100G - Rebuilt and finished. - Sold
2009 TE610 - Dual Sporting around dreaming of Dakar..... - FOR SALE!
www.parasiticsanalytics.com
TWINPOT BRAKE UPGRADE LINKY: http://www.thegsresources.com/_forum...e-on-78-Skunk/
Comment
-
80GS1000
OK, so a few emails to some Suzuki dealers in Tokyo and Sapporo revealed that the fairing from the GSX 1400 Wes Cooley special edition pictured above is no longer available from Suzuki of Japan. Bummer.
But, one of those dealers was nice enough to point out that there are aftermarket fairings that look pretty darn close.
Whaddya think? I'd get a plain white one and repaint it to look like the one pictured above.
and one mounted on a GSX 1400:
Here's the link: http://www.nproject-jp.com/bluster-s.htmLast edited by Guest; 01-19-2008, 08:18 PM.
Comment
-
Ironriot
Dude that thing looks killer. I say do it. Makes the bike more asthetically pleasing to the eye
Comment
-
beergood
Comment