Announcement

Collapse
No announcement yet.

Steering lock cover pin source?

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
    #1

    Steering lock cover pin source?


    Any of you crafty bastards found a source or some thing close to use to re anchor the steering lock cover?

    Here are some pics of what i talking about. The little brass mushroom guy (the pin) and the loose piece is the expansion collar the pin expands when driven in. (Mine has been cut)

    The hole for the anchor is 2.86mm aka 3mm, which 1/8" is closest. The (cut) male end is about 7mm long.
    The black and white image is roughly how it works, only difference is the pin has a mushroom head.

    I think the term for these is some thing like Pin Drive Anchors or mushroom head pin drive anchors or Nail Drive Anchor.​


    Attached Files
    78 GS1000 Yosh replica racer project
    82 Kat 1000 Project
    05 CRF450x
    10 990 ADV-R The big dirt bike

    P.S I don't check PM to often, email me if you need me.
    Tags: None
    #2
    Follow up, I stumbled onto this which matches what i have, I'll just order this instead of trying to source the nail....

    19782521 - $3.74 - Steering lock cover with pin and spring [19782521] : MG Cycle, Moto Guzzi Parts and Accessories available online at MGCycle.com
    https://www.mgcycle.com/index.php?main_page=product_info&products_id=5142
    MG Cycle 19782521 - $3.74 - Steering lock cover with pin and spring [19782521] - Steering lock cover with pin and spring for Neiman fork locks found on many models. Note the pin diameter is approximately 3mm.
    78 GS1000 Yosh replica racer project
    82 Kat 1000 Project
    05 CRF450x
    10 990 ADV-R The big dirt bike

    P.S I don't check PM to often, email me if you need me.

    Comment

    Previous template Next
    Working...
    X