Announcement

Collapse
No announcement yet.

touch up master cylinder and caliper?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    touch up master cylinder and caliper?

    Can someone recommend a good touch up paint for the master cylinder and caliper? I just did a rebuild for both and the result is some missing paint around various parts which I'd like to touch up. Any suggestions?

    #2
    VHT Hi-temp caliper paint. Comes in lots of colours. Just be sure to "bake" it at 200 degrees for 1 hour like it says on the can. It's brake fluid resistant & works great.

    Paul
    80 gs1100 16-v ported & polished, 1 mm oversize intake valves, 1150 carbs w/Dynojet stage 3, plus Bandit/gsxr upgrades

    Comment


      #3
      Originally posted by nastyjones View Post
      VHT Hi-temp caliper paint. Comes in lots of colours. Just be sure to "bake" it at 200 degrees for 1 hour like it says on the can. It's brake fluid resistant & works great.

      Paul
      Sounds like the right stuff to use if you have the parts disassembled and clean. I should have asked my question a few days ago

      Problem is that the caliper and master cylinder are now back on the bike and bled. I don't want to have to do that over again.

      Do you think it might work ok if I just stick a blowdrier on it for a couple of hours?

      Comment


        #4
        200 degrees F is not that hot....

        Originally posted by DimitriT View Post

        Do you think it might work ok if I just stick a blowdrier on it for a couple of hours?
        Should work, if not a blowdrier then certainly a heat gun would work.

        You really shouldn't get any brake fluid on it at all since you are done bleeding it, at least not until you change brake fluid next time.
        Something black parked in the sun a few hours at a time should cure the paint fairly well after a year or so...
        http://img.photobucket.com/albums/v5...tatesMap-1.jpg

        Life is too short to ride an L.

        Comment


          #5
          Best stuff I know of is Kal-Guard. It's avaliable through most major motorcycle parts suppliers

          Comment

          Working...
          X