I found that sand or glass bead blasting the parts is essential if you want to make the coating stick. Other than that it's pretty strait forward. just follow the flow out and cure times that come with each powder. Most of the parts that I've done I could not rattle can as cheap as the powder costs.
Announcement
Collapse
No announcement yet.
Harbor Freight powdercoat system
Collapse
X
-
Harbor Freight powdercoat system
About a year ago I saw a dirt cheap powder coat system in Harbor Freight, and bought it. Finally got around to using it..... This thing is cool. Works great. I bought 16 different colors of powder off of EBay for a total of $46 including freight, and I've been coating all kinds of things that are laying around the shop. I'm using a laboratory sample drying oven that is 4'x4' to bake the parts.(cost me $25 at a industrial auction) but a regular electric range or even a pizza oven would work. so far my total investment is just over a hundred bucks. My last trip to the coater was three times that.
I found that sand or glass bead blasting the parts is essential if you want to make the coating stick. Other than that it's pretty strait forward. just follow the flow out and cure times that come with each powder. Most of the parts that I've done I could not rattle can as cheap as the powder costs.Tags: None
-
jonesti
-
Dink
-
madjack57754
-
madjack57754
Comment
-
madjack57754
-
madjack57754
-
Planecrazy
-
madjack57754
-
Forum LongTimerGSResource Superstar
Past Site Supporter
Super Site Supporter- Mar 2006
- 35601
- Torrance, CA
Sign up for photobucket.com and load all your photos there. After they are loaded you can attach them here and they will be viewable, and much larger.
BTW, thanks for the feedback. \\/Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection
Comment
-
Mike McNaney
I went to Harbor freight and used their search feature. I didnt find the powder coat system. Maybe its been dropped?
Comment
-
Mike_H
no it's still there. I looked too. Gotta look under the paint spraying supplies. I think it was about a 100 bucks for the kit.
Comment
-
Mike McNaney
Good. I'll look again. Might be just what I need for a few parts on my bikes.
Thanks for looking past my nose
Comment
-
LeeGS550E
I wanted to revive this old thread, as I've just purchased this system. I have a decent blasting cabinet at home, but it is currently loaded with glass beads. I read somewhere that you must use sand or walnuts for prep for powder coat. Something about the glass beads making too smooth of a surface for the powder. Does anyone know about this?
Madjack, you said you were using glass beads to blast. How is the durability of the powder coating you have done so far? Can you describe your prep process and the results you have achieved?
Comment
Comment