.png "Powered by vBulletin")
Since one of the things missing from the GS im buying is the rear tail fairing and the seat is too short anyways i need to know some measurements so i can look into using something from airtech to change the bikes look a bit.
the Measurements i need are from the back edge of the gas tank all the way to the tail light as well as the with of the frame at the gas tank and at the frames widest point between those two points if the frame differs in width at all.
This is the seat im considering for the bike...it seems like it should almost replicate the original GS set up.
These are the measurements of the seat hence i need to know if it will in fact fit on the bike. It doesnt matter to me if i have to cut out the back to go over the tail light..actually that would be preferable so it all fits together..
the Measurements i need are from the back edge of the gas tank all the way to the tail light as well as the with of the frame at the gas tank and at the frames widest point between those two points if the frame differs in width at all.
This is the seat im considering for the bike...it seems like it should almost replicate the original GS set up.
These are the measurements of the seat hence i need to know if it will in fact fit on the bike. It doesnt matter to me if i have to cut out the back to go over the tail light..actually that would be preferable so it all fits together..
VSL26
Vintage seat large.
Vintage seat large.
Overall length: 28"
Seat pan lenght: 19"
Width front: 7.25"
Widest point: 9.5"
Seat pan lenght: 19"
Width front: 7.25"
Widest point: 9.5"