TheCafeKid

[TheCafeKid]

Nor have i...havent touched it since you were over sunday..screw work...lol Sunday or bust!! Rain or shine ill be wrenchin if you're bored..stop by!

[n1elkyfan]

I'm going to do some work sunday to but I might come over depends on how bored/mad I get at on what I'm working on.

[TheCafeKid]

Sounds good...if its rainin..ill either be in the manhole or the shed...damn not having a garage...but that shed i'll do to keep me dry to get those boots off.

[n1elkyfan]

Cool hopefully they don't give you to much trouble. I'm going to put those shocks and mirrors on then start working on the engine for my Caballero

[n1elkyfan]

TCK I got the parts today. I'll start working on it tonight hopefully it will go pretty easy.

[Ironriot]

Dude update on the bike:
Finally got the engine down to a machine shop to remove a broken exhaust bolt. While I was there I had them remove the idle air screw's in 2 carbs. Grand total = $25. I gave the guy 30 and thanked him a million times for the work. Looks like there's
nothing else my bike needs to get going again. Should be running by the end of next week!

By any chance did you get to mail the bars's?

[TheCafeKid]

Dude update on the bike:
Finally got the engine down to a machine shop to remove a broken exhaust bolt. While I was there I had them remove the idle air screw's in 2 carbs. Grand total = $25. I gave the guy 30 and thanked him a million times for the work. Looks like there's
nothing else my bike needs to get going again. Should be running by the end of next week!

By any chance did you get to mail the bars's?

Naw im STILL at work. Ill get them out on tuesday, cos i forgot monday UPS isnt running cos of Veterans Day. Tis a sad day in Buckeye country.

[Ironriot]

Naw im STILL at work. Ill get them out on tuesday, cos i forgot monday UPS isnt running cos of Veterans Day. Tis a sad day in Buckeye country.

Ah thats right veterans day I forgot about that

[TheCafeKid]

Great news on MY end of intake ring 101...boots came off like butter for the most part..couple whacks with the impact driver..i did mung a couple of the screw heads, but followed Nessims post about grabbing the boot and turning it to crack the two that wouldnt, loose. Rings were pretty much dust. one still had a lil rubberiness too it, but all were flattened and all the rest were like dust when i took them out...were your rings flat when you pulled them and your new ones round??

[Ironriot]

My rings where flat as roads in Iowa. And extremely brittle. Don't know what the new ones look like they haven't gotten here yet

[Ironriot]

By the way I hear ya on your buckeye woes. I'm a Bama fan and this season hasn't been the greatest

[TheCafeKid]

Sweet i just asked around...they will be round and dont wonder why..they're supposed to be...they flatten as you compress them and fill whats left of the channel they fit in..alls good hehe.

Ive been running out there durring comercials of my Broncos game and in between thunderstorms..lol but its gettin done at least..ill change my jets out tonight down in the manhole where its warm and dry. with any luck ill be ready for a synch tomorrow, and maybe ill have her running near right this week! Still gotta dick with that timing, but that should be pretty cake, my points are clean and look pretty new actually, no pitting or rounding to em. Im stoked!

[TheCafeKid]

By the way I hear ya on your buckeye woes. I'm a Bama fan and this season hasn't been the greatest

Sall good man they'll be good next year too, and my Bucks should be national contenders again. Have ALOT of good young guys...

SEC is TOUGH this year so even having a decent record in that confrence is saying something!

[TheCafeKid]

Jets changed out...needle clips adjusted...gonna have a look at the hardware store for some allen heads instead of trying to put these screws back in...they'd be fine but i dont want to attempt taking them out again ever. Getting ever closer...mwahahaha

[Ironriot]

Sall good man they'll be good next year too, and my Bucks should be national contenders again. Have ALOT of good young guys...

SEC is TOUGH this year so even having a decent record in that confrence is saying something!

Yup. Them southhern boys know how to play some good ol' smashmouth football.

Jets changed out...needle clips adjusted...gonna have a look at the hardware store for some allen heads instead of trying to put these screws back in...they'd be fine but i dont want to attempt taking them out again ever. Getting ever closer...mwahahaha

Pretty badass. Sounds like its a race between me and you to finish hehe. I only need a few things for the bike like new bolts for the intake flanges and for the exhuast and I still need to take the exhuast to get welded up because the PO put some better tips on then those wretched megaphones. Other than that I think everything is pretty much ready to go I just need to put it back together