how many layers of cloth, on average?
Announcement
Collapse
No announcement yet.
Aluminum foil or blue tape??? for custom seat
Collapse
X
-
OhioEric
so then, how much do you use on an average seat pan? a quart?
how many layers of cloth, on average?
-
Old Colt
A pint will do for your job. You will want a few layers of cloth. Once you think you have what you want the foam can be dissolved out leaving just the glass part. Then if it is not stiff enough you can add more material
Another option is to trim out most of the foam and leave a thin layer and apply a ply of glass to the inside and you will have a sandwich construction.
Comment
-
OhioEric
-
Hammered
Anyone still looking to make their own custom pan, this is a great tut to work from.
Comment
-
Old Colt
Originally posted by OhioEric View Postso 3 layers or 4?
mat or that woven cloth?
does it matter?
The more curves the stronger the part and thinner it can be. Flat areas should be thicker.
I have made tail sections with one ply of 8 OZ cloth that were fine, but a bit fragile. There was no taillight hanging off it though.
Comment
Comment