Cafe bars

[mmmansur]

I am new to the forum, but have found it helpful with my recent project (1981 GS550). I pulled it from a barn for free after a long 10 year storage. I went through the electricals, rebuilt the starter and cleaned the carbs. Now, it runs great and I would like to have it on the road. My style is more of the retro cafe look or modern street fighter (currently I ride a Triumph Speed four). I plan on eliminating the rear fender and fabbing a fiberglass seat pan and cowl (I have seen several on this sight that completely change the attitude of the bike). My question is concerning clubman style bars, I have seen several while shopping the web but I am not 100% sure on how to measure for them. Does anyone have a part # that they have used or know what may fit my bike? I am trying to keep this budget minded and usually turn to BikeBandit or the Old Bike Barn sites (always seem to have what I need). Any help would be appreciated

[ChrisLaw]

I bought my clubmans off ebay. It only took a few clicks to realize they were all the same measurements. Ordered them and had them 4 days later. (WI to KY)

[mmmansur]

Thanks for the info, I will have to check them out.

[Loose Seal]

Anything that is 7/8".

[Erich Z]

Loose Seal, that's a great name. My dog's name is Maeby, btw.

[Loose Seal]

lol!

You know, I have that name on a few other boards and you're the first person to get it or at least make a mention of it. Great name for a dog...haha.

[Joe C]

(currently I ride a Triumph Speed four).

Awesome! I've got an '03. Not too many of these around.

[Mysuzyq]

Awesome! I've got an '03. Not too many of these around.

Those do look very sharp! This yellow one I came across a couple months ago, was very tempting.

http://toronto.kijiji.ca/c-cars-vehicles-motorcycles-2005-Triumph-Speed-Four-Not-Honda-Suzuki-Kawasaki-or-Yamaha-W0QQAdIdZ52866641

Tony.

[mmmansur]

Never gets lost in a parking lot.