Post a picture of your custom GS

[Spot1000Kat]

Pic of My 83 1000 Katana parked at work, needs a good polish and paint job when funds permit. Has 1170 Arias Kit, 89 GSXR cams, Nicely milled,ported and epoxied head,RS36 Carbs,Backcut gears , and 750 Oil pump. Keeps my arms stretched , and a smile on the face

[pete]

Pic of My 83 1000 Katana parked at work, needs a good polish and paint job when funds permit. Has 1170 Arias Kit, 89 GSXR cams, Nicely milled,ported and epoxied head,RS36 Carbs,Backcut gears , and 750 Oil pump. Keeps my arms stretched , and a smile on the face

I think that would put a smile on anyone's face

Are you on the Katana Australia forum at all?

[Spot1000Kat]

Yes Pete, same Name, based up in Townsville, lovely 28 Deg Celcius up here during the day, could do with some rain though, go a heap of spare GSX parts, if your chasing anything PM me. How's things in the southern part of the sunshine state.

cheers,

Darryl

[madjack57754]

Here is my great pretender. Got a new sponsor who sells Yamaha, so while the FJ motors are being built, this is what he gets.
How good are you at identifing the parts?

[stetracer]

Pic of My 83 1000 Katana parked at work, needs a good polish and paint job when funds permit. Has 1170 Arias Kit, 89 GSXR cams, Nicely milled,ported and epoxied head,RS36 Carbs,Backcut gears , and 750 Oil pump. Keeps my arms stretched , and a smile on the face

Nicely milled, ported and epoxied head

"Nicely done heads" is what I call my company hear in Florida. Is there another company in your country with the same name. I am in the process of getting all the paper work to become a LLC. I have sent a couple of heads to the land down under but they were GSXR heads




.

[blowerbike]

Here is my great pretender. Got a new sponsor who sells Yamaha, so while the FJ motors are being built, this is what he gets.
How good are you at identifing the parts?

FJ body
GS engine/frame
700/750/1100 ES fairing

[Spot1000Kat]

Nicely milled, ported and epoxied head

"Nicely done heads" is what I call my company hear in Florida. Is there another company in your country with the same name. I am in the process of getting all the paper work to become a LLC. I have sent a couple of heads to the land down under but they were GSXR heads




.

Hi JD,

I only meant Nicely , as in Nicely Done, Not Done by Nicely. I ported it myself with a spare head over a few weeks, was a bit conservative , but my butt dyno definitely says it is a good improvement.I know I should have got it flowed checked/ and a dyno comparison, but a bit short on the coin side of things , so gave it a go anyway whilst cleaning the spare head up. Had .020 milled off , and recut the valve seats etc as well, will post a few pics if I can work out how to get them under the required size.
Cheers,

[stetracer]

Hi JD,

I only meant Nicely , as in Nicely Done, Not Done by Nicely. I ported it myself with a spare head over a few weeks, was a bit conservative , but my butt dyno definitely says it is a good improvement.I know I should have got it flowed checked/ and a dyno comparison, but a bit short on the coin side of things , so gave it a go anyway whilst cleaning the spare head up. Had .020 milled off , and recut the valve seats etc as well, will post a few pics if I can work out how to get them under the required size.
Cheers,

That's cool. That is how I started doing my own heads because I was on a budget and I got a lot of good advice from a few great engine builders. The first head I ever did myself was also for my 82 Katana 1000 in the late 80's

[GSXR7ED]

How the Frick...

My 1100 shaftie. Treats me well after all these years.

Does this guy get a guest post???


Ed

[stetracer]

Well I got rid of the street fighter look and put a stock headlight on it. I painted the bucket to match the wheels.

[stetracer]

Here is a front view.

[jwhelan65]

My 1150 wheel conversion on my 700es

[quexpress]

Well I got rid of the street fighter look and put a stock headlight on it. I painted the bucket to match the wheels.

Very nice!
What size hoses have been used to build your top end oiler?
Thanks!

[MisterCinders]

Ready for football season.





Still have the purple set. It's just off to the side.

[Gregory]

Ready for football season.





Still have the purple set. It's just off to the side.

cool idea.

it reminds me of the strategy in "need for speed" video to reduce heat from the cops. When they are looking for the demon running around on a purple bike... Walla he has disappeared.