That is one sweet ride. Very nice sir
Announcement
Collapse
No announcement yet.
Post a picture of your custom GS
Collapse
X
-
russr33
-
Big_T112
85 1150 Turbo
1985 GS1150ES Turbo. 1395cc bigblock, web cams, Ward head, Falicon crank and rods, Strait cut gear with billet basket, race cut trans. with billet 2nd and 3rd gear, MTC lockup. Streched 4 inches, swingarm widened, Stock rear wheel widened to take a 190/55 tire. Dyna 2000 ignition with boost activated timimig retard, Airshifter, A blast from the past,
Comment
-
Big_T112
wheel
You send it to Kosman and he machines the stock sides down and then welds new wider sides back on. I am saying this because with the tire off you can see from the inside where it has had the new piece added on each side of the rim. turns it into a 6" inch wide rim that will now hold a 190/55-17" modern tire. The previous owner did the wheel. I am sure it was not cheap. I am going to put the GSXR wheels and brakes I have on it and take these in the picture off.
Comment
-
KiwiGS
-
Lookin' good. Did you knit a red master cylinder cozy?Dogma
--
O LORD, be gracious to me; heal me, for I have sinned against you! - David
Skeptical scrutiny is the means, in both science and religion, by which deep insights can be winnowed from deep nonsense. - Carl Sagan
--
'80 GS850 GLT
'80 GS1000 GT
'01 ZRX1200R
How to get a "What's New" feed without the Vortex, and without permanently quitting the Vortex
Comment
-
Originally posted by KiwiGS View PostI can see the light at the end of the tunnel, on this project.
Does it run good? (perfect)sigpic
82 GS850
78 GS1000
04 HD Fatboy
...............................____
.................________-|___\____
..;.;;.:;:;.,;.|__(O)___|____/_(O)|
Comment
-
KiwiGS
Originally posted by Dogma View PostLookin' good. Did you knit a red master cylinder cozy?
Originally posted by Octain View PostLooks good!
Does it run good? (perfect)
It ran good before, so it should be better
Comment
-
Hector Penalosa
-
Hector Penalosa
-
Hector Penalosa
-
se7enine
-
L3X1V0R3
Rat-ish mod in progress...here is the current state. So far it's just a lot of paint and black duct tape. I'm in Wisconsin so I'll have all winter to work on the big mods. With a little work this should have a lowered back end and a solo seat by spring as well as some nifty knobby tires covering up the chrome on the fenders. After that It's probably gonna be a collection bike of sorts. Lots of keys and baby doll heads, skulls and other bits of dead animals, cargo nets...you know the sort.
Comment
Comment