Announcement

Collapse
No announcement yet.

Post a picture of your custom GS

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Just an FYI you cannot powder coat magnesium

    Comment


      The Lang Brothers at BBR (Bare Bone Rides, Inc.) finished this build in October of 2012. It started off as a fairly well weathered and stock Suzuki GS850. ...


      Not mine but thought it was pretty cool!

      Comment


        Originally posted by Charlie G View Post
        Does that take an English wheel and do you have one?

        cg
        It does not take an English wheel, but I do have the machine to turn the edge properly, and yes I do have an English wheel.
        V
        Gustov
        80 GS 1100 LT, 83 1100 G "Scruffy"
        81 GS 1000 G
        79 GS 850 G
        81 GS 850 L
        83 GS 550 ES, 85 GS 550 ES
        80 GS 550 L
        86 450 Rebel, 70CL 70, Yamaha TTR125
        2002 Honda 919
        2004 Ural Gear up

        Comment


          Originally posted by jwhelan65 View Post
          Just an FYI you cannot powder coat magnesium

          I beg to differ sir....

          Comment


            Originally posted by russr33 View Post
            I beg to differ sir....
            you'll get some powder folks back away from the job.
            some freak about any combustion potential during curing
            others claim the result is brittleness
            I don't know the facts ... just used to source powdercoating in work situation, and recall the magnesium hesitation during discussions.
            Be great to know the FACTS (?)

            Comment


              Originally posted by ptexotik View Post
              you'll get some powder folks back away from the job.
              some freak about any combustion potential during curing
              others claim the result is brittleness
              I don't know the facts ... just used to source powdercoating in work situation, and recall the magnesium hesitation during discussions.
              Be great to know the FACTS (?)
              Interesting. Mine has held up great no problems at all.

              Comment


                It is true that solid magnesium can burn under suitable temperature conditions, but those temperatures are higher than 400 Celsius - no powder coating oven goes that high. Molten magnesium is the stuff that needs to be handled carefully, not a solid mag wheel.

                Brittleness? Why do people say things like that? If anything, the magnesium alloy would be annealed and made softer. In any case, powder coating ovens don't get to high enough temperatures to cause any serious heat treatment effects.
                Last edited by Guest; 11-06-2013, 08:54 AM.

                Comment


                  Originally posted by xtribe00 View Post








                  Got it a couple months ago and started customizing ASAP.... (Also my first bike)
                  Changed a few things





                  Last edited by Guest; 12-06-2013, 04:51 PM. Reason: Adding additional photo

                  Comment


                    Make it your own,nice job.
                    http://i632.photobucket.com/albums/u...00080021-1.jpg
                    1978 GS1000C
                    1979 GS1000E
                    1980 GS1000E
                    2004 Roadstar

                    Comment


                      Looks like it's running lean though. Check the blue on those headers.

                      Comment


                        Good looking bike. Cool tail lights.
                        What was done regarding the jetting.
                        And on the seventh day,after resting from all that he had done,God went for a ride on his GS!
                        Upon seeing that it was good, he went out again on his ZX14! But just a little bit faster!

                        Comment


                          Originally posted by xtribe00 View Post
                          Changed a few things





                          Me like!

                          Comment


                            Originally posted by KEITH KRAUSE View Post
                            Good looking bike. Cool tail lights.
                            What was done regarding the jetting.
                            I bought it in Wisc and took it to a local honda dealer and they did a mild adjustment (Richening) because it was running lean when I got it. Not really re-jetted. I will look into getting that done this coming spring. Next month I plan to wrap the pipes (DEI - Black)

                            Winter is needs to hurry and get up outta here. I am ready to ride.....

                            Comment


                              Originally posted by Rover View Post
                              Make it your own,nice job.
                              Thanx!!! Got a few more things I want to do.

                              Comment


                                Not me, or anyone i know, but dang...

                                '80 GS1000ST
                                '92 ZX-11
                                Past rides: '79 GS1000SN, '84 GPZ900R

                                http://totalrider.com/

                                Comment

                                Working...
                                X