center mout swingarm for gs750 1979

[andtex24m]

where do i get them and how much do they cost

[andtex24m]

sorry i meant center mount shock swing arm

[Billy Ricks]

Do you mean a mono-shock swingarm? If so Ebay is probably your best bet. I have a '93 GSX-R banana swingarm I might be interested in parting with if you're looking for a mono-shock setup.

[andtex24m]

well what would be your parting price and what kind of mods will i need to do to make it work?

[Billy Ricks]

I'm not sure about your application but, you normally have to grind the inside of the frame bosses where the swingarm mounts to gain enough clearance at the swingarm pivot points on the frame. Then you have to modify the frame to allow for upper and lower shock mounting points. Then you need a shock. I have a caliper that goes with the swingarm if I remember correctly. It's not an easy job by any means.

This swingarm is just gathering dust so I'd probably let it go for $75 plus shipping. You would probably be better off looking for a Full-Floater setup from one of the later GS models. '83 and up GS700/750E and GS1150 models were Full-Floaters. You see them on Ebay fairly regularly. If you go the GS route I have an old shock you can have just for shipping cost.