Announcement

Collapse
No announcement yet.

lower bars for 1978 GS1000

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    lower bars for 1978 GS1000

    I recently bought a 1978 GS1000 and want to put superbike style lower bars on it. Does anyone know the correct clutch and throttle cable part numbers to use? Cani use the GS1000S parts or are the ends possibly different to attach to the carbs? Thank you.

    #2
    www.alpha-sports.com will have the parts # you are looking for.
    I recently put S throttle cables on my '78 GS1000. A very tight fit as far as the length is concerned. I should have slightly lower bars.
    2@ \'78 GS1000

    Comment


      #3
      GS1000 shorter cables

      Thanks Steve, did you use the 1979 'S' part numbers? any chance you can tell me how much rise you have so i use shorter bars?

      Comment


        #4
        I put super bike bars on my S and the stock cables work great. I made the mistake of thinking the cables for all the GS1000 models for that year are the same..duh..no. The S cables are four and a half inches shorter.
        1979 GS1000S,

        1982 Honda CX500 Turbo, 1982 Honda MB5 w/CR80 motor, 1977 Honda "nekid" Goldwing, 1976 Honda CB550F cafe', 1972 Honda XL250 cafe'

        Comment


          #5
          I have used Euro & Superbike. Stock clutch cable is a little tight but it does work. S clutch cable is better.

          You can stick with stock throttle cable (I have on both my bikes) with no problems.

          Dan
          1980 GS1000G - Sold
          1978 GS1000E - Finished!
          1980 GS550E - Fixed & given to a friend
          1983 GS750ES Special - Sold
          2009 KLR 650 - Sold - gone to TX!
          1982 GS1100G - Rebuilt and finished. - Sold
          2009 TE610 - Dual Sporting around dreaming of Dakar..... - FOR SALE!

          www.parasiticsanalytics.com

          TWINPOT BRAKE UPGRADE LINKY: http://www.thegsresources.com/_forum...e-on-78-Skunk/

          Comment


            #6
            Superbike bend bars are similar to the S bars. Having the proper length cables makes the routing cleaner without all the excessive length creating possible binding.
            Ed

            To measure is to know.

            Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182

            Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846

            Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf

            KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection

            Comment

            Working...
            X