93-98 GSXR 1100 header fitment question

[patrickmcp]

Ok, so the 86-92 headers will work, albeit an exhaust collar mod, right.
The spacing is correct...

But is the header tube spacing AND the collar are what is wrong with the 93-98 GSXR 1100 header. Can they just be modded to fit or is there something else I'm missing? What is wrong with the watercooled Gsxr's headers to make it fit the GS1000 or 1100's?

Thanks

[80GS1000]

The spacing is wrong and the tubing sizing is wrong to use a watercooled GSXR header on a GS. I tried to use a nice GSXR 1000 Ti header on my project, no dice. The other watercooled Gixxer headers are the same story.

[patrickmcp]

Real shame, guess that's a no-no to the Ti-Yoshimura 4-1 with CF can.

[patrickmcp]

On the same header note, that Bandit header I bought off Fleabay over the winter turned out to be for a 600 and not the 1200, collector bangs the oil pan. It was listed as a 1200 and they look the same.

I'm back to running my rusty V&H 4/1. I have a gixxer parts guy keeping an eye out for a 4-2-1 setup, day before I called him he sold a Hindle and Yoshi 4-2-1's.

How are the Supertrapp mufflers any good? Thinking about the 4' diameter 10" long version tucked right in front of the rear wheel.

[posplayr]

Did I hear Yoshi 4:2:1?

I'm in the process of trying to modify this one.

http://www.thegsresources.com/_forum/showpost.php?p=1027117&postcount=54

Looking for a bender to tweak it a little better than it is fitting at the moment on my ED.

[patrickmcp]

Nice system POSPLAYR. Any thoughts on the Supervontrapp?

[posplayr]

which one is that?

If I was a starting from scratch ; I might consider this. It probably fits just about like the SS 4:2:1 and with a little teak woudl be nice pipe especially for the price

http://cgi.ebay.com/ebaymotors/SUZUKI-GSX-1100-YOSHIMURA-EXHAUST-SYSTEM-GSXR-1127_W0QQcmdZViewItemQQ_trkparmsZ65Q3a12Q7c66Q3a2Q7c39Q3a1Q7c72Q3a1171Q7c240Q3a1318Q7c301Q3a1Q7c293Q3a1Q7c294Q3a50QQ_trksidZp3286Q2ec0Q2em14QQhashZitem20ac10369cQQitemZ140325697180QQptZMotorcyclesQ5fPartsQ5fAccessories

A little more bling.

http://cgi.ebay.com/ebaymotors/New-Vance-Hines-SS2R-4into1-Exhaust-Suzuki-GSXR-1100_W0QQcmdZViewItemQQ_trksidZp3286Q2em20Q2el1116QQhashZitem3ef497a116QQitemZ270391550230QQptZMotorcyclesQ5fPartsQ5fAccessories

http://cgi.ebay.com/ebaymotors/SUZUKI-GSXR-1100-FULL-EXHAUST_W0QQitemZ150348725721QQcmdZViewItemQQptZMotorcycles_Parts_Accessories?hash=item23017b7dd9&_trksid=p4506.m20.l1116#ebayphotohosting

I was stuck on 4:2:1 for ground clearance on Gixxer conversion.

[patrickmcp]

I like the 4:2:1 for ground clearance as well.
Not exactly a flat 4:2:1 that I was hoping for but...

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&ssPageName=STRK:MEWAX:IT&item=180366379957

[posplayr]

Yea I had seen that. WC GSXR

[toolman]

i have that exaust on my 1150 and it fits very well. the only mod was the flanges ,other than that it bolted up very nice.
have a look in my profile for some pics of the system on the 1150.
as far as putting it on a 1000 or 1100 it would take lots of mods and probably not work that good anyways.
good luck .....toolman

[posplayr]

Toolman

Which pipe you talking about. Your 1150 looks to have the 88-92 GSXR 1100 exhaust we were discussing in another thread.

BTW I took an 1150 Yoshi 4:1 and by cutting off about 4" off the midpipe and relocating the hanger 3" it now fits an 1100E. header required no mods.

[patrickmcp]

I've read on the OldSkoolSuzuki site that they took 2001+02 GSXR 1000 factory headers and made them work. I can't see how with the angle of the bend coming off the motor.