Turning Signals

[djg42]

Hello,
I would like to replace the stock signals with some that are cooler looking, anybody have any suggestions of a compatible pair?? Can you post pictures? thanks!!

1980 GS450

[sachsaca]

Use the web we all have. It's full of stuff. Just type in motorcyc;e turn signals. Good luck

http://www.denniskirk.com/jsp/product_catalog/cat_default.jsp?store=Main&catId=4&SR=sr2dk1go1021go85pi3ai13&gclid=CLOcm5uT_o8CFQV4HgodAWxcHA

[djg42]

thanks, but Im just not sure how to tell if it will be compatible-for example do I get single or double filament etc..

[spyug]

You want single filament unless you want to set them as running lights too. They should have two wires...one is power, one is ground.

Many are now LED types and to run them you will need load resistors in series with them as the LEDs don't draw enough amperage to activate the stock turn signal module. alternatively you can change out the module to a digital type. This has been talked about before so do a search for more details.

Not a hard project just get the lights first and plug them in where you unplug the stockers or follow you schematic for the corredct wires.

Don't forget to show us some pics of your upgrades

Good luck with it.
Spyug

[djg42]

thanks alot!