Announcement
Collapse
No announcement yet.
Removing front blinkers
Collapse
X
-
Demonthrall
Removing front blinkers
I want to remove my front blinkers, but keep the back ones in working order. Does anyone know what to do with the front blinker wires to achieve this? Thanks in advance.Tags: None
-
BassCliff
Hi,
Get yourself an off-the-shelf electronic signal flasher to replace the stock unit. Then just leave the front turn signal wires unconnected in the headlight bucket.
Thank you for your indulgence,
BassCliff
-
Demonthrall
What is the purpose of the flasher? Where does it go? thanks for all the info on your site by the way.
Comment
-
Demonthrall
When I remove the front signals, and hit the blinker switch, the corresponding rear blinker stays lit, and does not blink?
Comment
-
BassCliff
Originally posted by Demonthrall View PostWhen I remove the front signals, and hit the blinker switch, the corresponding rear blinker stays lit, and does not blink?
See the Turn Signal Relay Replacement guide on my website for ideas.
Thank you for your indulgence,
BassCliff
Comment
-
Demonthrall
Originally posted by BassCliff View PostThat's because the stock flasher unit wants to see a specific load. When you remove 2 bulbs it no longer sees the proper load (resistance). That's why you need an electronic flasher. It doesn't care about the load, it just flashes.
See the Turn Signal Relay Replacement guide on my website for ideas.
Thank you for your indulgence,
BassCliff
Comment
-
Skateguy50
to pass inspection is up to your state, but if you use hand signals the police can not stop or ticket you for having blinkers not working or non existant.
Comment
-
emjay
Comment
Comment