turn signals

[unclebeaner]

what are you guys using for a shorter more tight look? thought about cutting mine down but seems to be alot of work for little gain

[wacky941]

Take a look at my photo album, http://www.thegsresources.com/_forum...hp?albumid=839 I changed mine about six months ago, it worked out great. The signals are no longer the focal point whenever you look at the bike, the new ones are nice and small while at the same time nice and bright. The only drawback is that my front signals are no longer used as running lights, doesn't really matter to me but others might think differently.
One other thing, my auto cancelling no longer works.

Hope this helps.

[unclebeaner]

were did you get them? my auto cancel if a 50 50 shot if it works anyways. looks nice

[AF_Bill]

I used the stock set and removed the shaft. Tucks them in real nice and close. I'm also able to put them back together if I decide to. BE CAREFUL if ya do this. I broke one removing the shaft. Good think I already had new mini-lights up front.

[wacky941]

were did you get them? my auto cancel if a 50 50 shot if it works anyways. looks nice

Here is a link to a thread I had started a little while back which gives information on the turn signals, there are only two pages to it so it wasn't very long but it has information about the turn signals and the flasher relay that I ended up using.

http://www.thegsresources.com/_forum/showthread.php?t=153948&page=2

Let me know if this helps you, I can also give you info on how I mounted everything if you need it.

[unclebeaner]

will do i think im going to remove the shaft showen in the thread. i think its neat using stock parts

[AF_Bill]

I wish I had actually taken pics of me takin it apart. It's pretty easy but again, be careful. Do you plan on doin this mod to both front and rear signals?

[unclebeaner]

yes sir

[Sparky]

im thinking about putting an integrated tail light on. Its a running light, brake light, turn signals, and license plate light all in one fender mounted unit and its all LED, then some LED signals to match up front. Thats the plan anyways after the mechanical side of the project is done.

[unclebeaner]

yes i do ill tear it apart on my new day off when ever that may be

[VinciMMA]

What Wacky941 has on his is very similar to what I had on my old GZ250.
Sport bike signals work really well and they're pretty cheap..and brighter! Least mine were don't remember who made them though.

They're easy to tuck away as well if you wanted that hidden look when not in use.

[rphillips]

What bike are you talking about??? Some bikes, like the GS1100's have longer & shorter stems for different models & front or rear placement. In my opinion, using the front turn signal stems from an "80" or "81", GS 1100"E", on the rear of any 4 valve GS 1100 improves the looks more than you can imagine, & still has the look like it came from the factory that way.