.png "Powered by vBulletin")
It looks way too good to be brushed on.Do you thin it down to spray?
-
-
Sorry, Brushed Stainless is the name of the color. You do not thin it as it is very thin allready. I use an airbrush to apply. optimal coating is .004 thousandths! very thin but very durable after baked.Originally posted by Hodado View Post
using a larger airbrush I coated my rear wheel using about 4 oz.
KenComment
-
Brushed Stainless or Silver to match the stock Suzuki silver engine paint?Originally posted by Darkstang View PostEd
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-ResurrectionComment
-
I buy direct from KG but I suppose one source is as good as another.
All the parts I painted with the gun coat were freshly sand blasted cleaned with acetone let dry then paint let dry then bake 325 for an hour to a hour and a half.
Not sure why the rims scratched I know the screw driver is a bad idea but I beat the hell out of the spare oil filter cover denting the aluminum and it didnt chip.
Comment
-
I also forgot to mention that I PREBAKE everything as well. Some cast parts are porous and even with acetone wash, oils can leach out when at oven temps. I had to redo a shotgun reciever once because I did not bake all the old oils out first. from then on prebake after cleaning degreasing but before blasting.
That is my method for good results.
KenComment
Comment