Announcement
Collapse
No announcement yet.
Got my Marving fitted.....lovely jubbly
Collapse
X
-
Billy Ricks
Off topic I know but it might help someone reading this thread. Hindle still has a few of their pipes that fit the oil cooled GSX-R750. First generation and the last generation oil cooled pipes are available. These will fit the '83 and up 700/750E models. They have the header and midpipe in stainless and they are spring mounted. They are 4>2>1 headers that help with ground clearance as well. You can use any 2" inlet can with them. They're on sale for $299 Canadian. I bought one about a year ago and it cost $354 Canadian to the door. I don't remember what the real total was after the exchange rate.
-
El Giablo
-
Jason the terminator
-
Do Little
monsterparts.com
They can hook you up if you email them, they have to special order them but its the only US dealer I could find.
Comment
-
Forum LongTimerGSResource Superstar
Past Site Supporter- Oct 2006
- 13998
- London, UK to Redondo Beach, California
Once fitted is the Marving written on the can facing the sky? Seems to be the way it wants to fit on mine....
Seems a bit odd how they placed the baffle bolts if so plus where they stated and finished the welds.
Looks like your baffle bolts are same, one on top, one on the outside.1980 GS1000G - Sold
1978 GS1000E - Finished!
1980 GS550E - Fixed & given to a friend
1983 GS750ES Special - Sold
2009 KLR 650 - Sold - gone to TX!
1982 GS1100G - Rebuilt and finished. - Sold
2009 TE610 - Dual Sporting around dreaming of Dakar..... - FOR SALE!
www.parasiticsanalytics.com
TWINPOT BRAKE UPGRADE LINKY: http://www.thegsresources.com/_forum...e-on-78-Skunk/
Comment
-
Originally posted by Billy Ricks View PostOff topic I know but it might help someone reading this thread. Hindle still has a few of their pipes that fit the oil cooled GSX-R750. First generation and the last generation oil cooled pipes are available. These will fit the '83 and up 700/750E models. They have the header and midpipe in stainless and they are spring mounted. They are 4>2>1 headers that help with ground clearance as well. You can use any 2" inlet can with them. They're on sale for $299 Canadian. I bought one about a year ago and it cost $354 Canadian to the door. I don't remember what the real total was after the exchange rate.
Do you have a picture?sigpicJohn Kat
My bikes: CB 77, GS 1000 ST Cafe Racer with GSXR 1052 engine, GS 1000 ST, XR 41 Replica with GS 1085 engine,
GS 1100 SZ Katana with GS 1135 EFF engine, KTM Superduke 1290 R 2020
Comment
Comment