Got my Marving fitted.....lovely jubbly

[Billy Ricks]

Off topic I know but it might help someone reading this thread. Hindle still has a few of their pipes that fit the oil cooled GSX-R750. First generation and the last generation oil cooled pipes are available. These will fit the '83 and up 700/750E models. They have the header and midpipe in stainless and they are spring mounted. They are 4>2>1 headers that help with ground clearance as well. You can use any 2" inlet can with them. They're on sale for $299 Canadian. I bought one about a year ago and it cost $354 Canadian to the door. I don't remember what the real total was after the exchange rate.

[El Giablo]

Very nice...

[Jason the terminator]

Anyone know of where you can get them in the US?

[Do Little]

monsterparts.com

They can hook you up if you email them, they have to special order them but its the only US dealer I could find.

[salty_monk]

Once fitted is the Marving written on the can facing the sky? Seems to be the way it wants to fit on mine....

Seems a bit odd how they placed the baffle bolts if so plus where they stated and finished the welds.

Looks like your baffle bolts are same, one on top, one on the outside.

[John Kat]

Off topic I know but it might help someone reading this thread. Hindle still has a few of their pipes that fit the oil cooled GSX-R750. First generation and the last generation oil cooled pipes are available. These will fit the '83 and up 700/750E models. They have the header and midpipe in stainless and they are spring mounted. They are 4>2>1 headers that help with ground clearance as well. You can use any 2" inlet can with them. They're on sale for $299 Canadian. I bought one about a year ago and it cost $354 Canadian to the door. I don't remember what the real total was after the exchange rate.

Hi Billy, will these fit an 1100 Kat?
Do you have a picture?

[Vmass]

Beautiful set up!