alrighty, I got my Z1 package

[Guest]

and I replaced most of the screws however, I have some extras that I am unsure about:
I have 8x of these



and 9x of these



I would have 10x but I replaced the screw on the tach cable-engine connection...

Where would these go?

[dr_fosg8]

The ones in the first pic I believe are for the cam end covers. The others could go anywhere. Any idea what size they are?

[JCSkokos]

they are almost identical thread-wise to the top picture, the only difference is the head

[Octain]

Z1 package of what?

[JCSkokos]

the 'lower engine bolt kit'

[Steve]

The ones in the first pic I believe are for the cam end covers. The others could go anywhere. Any idea what size they are?

I concur, the first picture shows fasteners for the cam end covers.

Use Blue Loctite when installing them if you want to keep them.

.

[JCSkokos]

I concur, the first picture shows fasteners for the cam end covers.

Use Blue Loctite when installing them if you want to keep them.

.

lol, that may explain how I may be missing one of those covers. well, I didnt lose it, but it was missing when I picked up the bike in November

[Adler]

The first thing I did when I got my kit was to go on the fiche and make smaller baggies for all the components.

[ddaniels]

Second ones look like they could be for the tops of the carbs or for the float bowls, but not if you only have 9, or even 10.

[JCSkokos]

[QUOTE=ddaniels;1348972]Second ones look like they could be for the tops of the carbs or for the float bowls, but not if you only have 9, or even 10.[/Q]

good point. It could work out for the inner carbs' tops in case I need to take them off w/o removing the carbs. or the outer ones for appearance reasons.

[afholderman]

2 for the starter cover, 8 for the carb rail?

[JCSkokos]

well my starter cover has 3 bolts, but I might be able to find another spot for it... Like on the horn

[Colin Green]

The stator cover appears to have 9. Although possibly of differing lengths?

[JCSkokos]

yeah, theres 3 sizes I believe. I have all the covers' bolts set aside or in place currently. I was just curious about the few I mentioned

[ddaniels]

Did you go on Z1's website and try to decipher what those are for?