Announcement
Collapse
No announcement yet.
Part GS Part ZX
Collapse
X
-
andrewt8709
Part GS Part ZX
Just picked this up. Just needs a few things to be on the road. It's a 78 gs 750 with kawasaki zx10 front end and wheels. swing arm is custom built.Tags: None
-
andrewt8709
-
Flaming Chainsaws
-
amxsteve
-
1 of a kind for sure
I have always loved the eccentric chain adjuster of the ZX10 ZX11 - how cool !! you can adjust the chain without disturbing the pre load on the wheel bearings, nor the squareness of the axle alignment.
fneders keep the dirt stripe off of ya. Bigger carbs in the future?
What is the wheel base of it? I like it - a lotSUZUKI , There is no substitute
Comment
-
SqDancerLynn1
-
t-money
-
resjudicata
I swear I've seen that bike before. Where are you located?
I'm not a big chopper/bobber fan but at least the person who built that put some effort and thought into it. Much better job than most I've seen.
Chris
Comment
-
What are your plans for the tank? Paint? Leave it metal?http://i632.photobucket.com/albums/u...00080021-1.jpg
1978 GS1000C
1979 GS1000E
1980 GS1000E
2004 Roadstar
Comment
-
andrewt8709
Yeah just leaving it as is. It just needs a few things to be on the road. I had to build a bracket for the rear master cylinder. Carbs need work. Which will probably be a nightmare.
Comment
-
davidduarte
I can't see a battery, is there one or do you have a battery "eliminator" for lack of a better word?
Comment
Comment