Announcement

Collapse
No announcement yet.

Aesthetics

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
    #1

    Aesthetics

    I have enclose 3 snaps of my 79 gs850 gas tank. {Hopefully they will show up } Anyways , Im wondering if anyone knows how to get these dents out? I was wondering if i could go in thru the filler neck and pound them out? Is the sleeve in the filler neck removable? Unless i can remove it , i wont be able to pound them out?
    I have received alot of great answers to my questions in the past , and again would like to thank everyone for that , as well as the excellent advice I'm sure to receive on my latest inquiry....
    Graf
    Tags: None
    #2
    posting other two pics now.........

    Comment

      #3
      and the last pic,,, sorry havent figured out how to attch more than 1 file at a time..........

      Comment

        #4
        Boy, those are ugly. They're gonna be hard to repair, especially the left side where the emblem goes. A stud gun would be my advice, but it'll never get em all the way. Pull them (or have a body shop pull them for you) as far as you can w/o pulling them too far, then fill with a good quality body filler. It might be easier in the long run to look for another tank.
        1979 GS1000S,

        1982 Honda CX500 Turbo, 1982 Honda MB5 w/CR80 motor, 1977 Honda "nekid" Goldwing, 1976 Honda CB550F cafe', 1972 Honda XL250 cafe'

        Comment

          #5
          definetly a stud gun with a slide hammer will get those out. but at what cost? if you could rent a stud welding gun and the slide hammer id say get at it but if you have to take it to a body shop it would be cheaper to get a new one

          Comment

            #6
            Originally posted by Grafilthy View Post
            and the last pic,,, sorry havent figured out how to attch more than 1 file at a time..........
            http://members.dslextreme.com/users/bikecliff/images/how_to_post_pictures.pdf


            Follow these steps and you can post pictures. I have an undented (but ugly) '81 GS850G tank if you want it, for $60 plus the cost of shipping. PM me if you're interested.

            Comment

              #7
              Guys thanks for all the advice , i think i will start looking for a new used tank ... Saw a few on E - bay ... And will look into other sources as well .....
              Now if I could just get the timing right , some blinkers {all 4 } , and some clip ons or
              clubmans , She'd be ready to roll .....Perhaps by tomorrow I'll have most of it back together and will post a couple shots of it .

              Thanks again for all the great help Ive received on here...
              Graf

              Comment

                #8
                Originally posted by DanTheMan View Post
                ... I have an undented (but ugly) '81 GS850G tank if you want it, for $60 plus the cost of shipping. PM me if you're interested.

                Did you miss this part of Dan's post?

                Comment

                Previous template Next
                Working...
                X