1980 GS1000 switch control pics please

[Vmass]

You sure you want to put stickers on that nice, newly painted bike of yours? Heck, new switches only cost ya about $140.

I have the two new switches.... I really only need the ignition decal.

I will put the stickers on the old switches and sell them on Ebay as:
New Old Switches

[keman]

He's making a list,
And checking it twice;
Gonna find out Who's naughty and nice.
Santa Claus is coming to town

He sees you when you're sleeping
He knows when you're awake
He knows if you've been bad or good
So be good for goodness sake!

O! You better watch out!
You better not cry.
Better not pout, I'm telling you why.
Santa Claus is coming to town.



DP

Is it just me? That song makes Santa fit into a stalker definition.
You can get a restraining order for Santa!

[Frank Z.]

I have the two new switches.... I really only need the ignition decal.

I will put the stickers on the old switches and sell them on Ebay as:
New Old Switches

Nice. Henceforth to be referred to as the extremely rare GS Sticker Switches.

[Vmass]

Any chance of doing additional decals, such as the one that goes on the front left fork?

My bike had an illegible label on the front left fork. I don't see it listed on the parts fiche.

Any idea what it was? Maybe air pressure label for front forks.

[Frank Z.]

Any chance of doing additional decals, such as the one that goes on the front left fork?

My bike had an illegible label on the front left fork. I don't see it listed on the parts fiche.

Any idea what it was? Maybe air pressure label for front forks.

I know the one you're referring to; IIRC it was a silver foil label. Perhaps another forum member has one in nice condition and could submit a pic?

[Good Times]

Me toooooo!!!! I want some toooo!

[Guest]

I will gladly take a set for my 80 1000G. I'll try to keep tabs on the thread for when you post they are ready, thanks for all the work on this.

[Frank Z.]

I will gladly take a set for my 80 1000G. I'll try to keep tabs on the thread for when you post they are ready, thanks for all the work on this.

Should be receiving first batch next week sometime. Will scour previous posts and let everyone know where/when/how to send $.

Maybe I should have ordered more than 20 sets.

[Vmass]

I know the one you're referring to; IIRC it was a silver foil label. Perhaps another forum member has one in nice condition and could submit a pic?

I think you are correct. This is certainly not a necessity, just adds a nice touch.

[tatu]

Should be receiving first batch next week sometime. Will scour previous posts and let everyone know where/when/how to send $.

Maybe I should have ordered more than 20 sets.

I've just found this thread, they look really nice, am I too late?
I really only need an ignition switch decal, or three.
I think its a really good idea I swapped out the whole panel on my S to get the white lettering on the instrument lights.

[SVSooke]

Maybe I should have ordered more than 20 sets.

Probaly,I to could use a set.

[Steve]

Should be receiving first batch next week sometime. Will scour previous posts and let everyone know where/when/how to send $.

Maybe I should have ordered more than 20 sets.

Here, Ill save you the trouble.

Nice work, Frank, how much for a set?

Put me down for a possible FIVE sets.

Since they appear to have two sets per card:

Please let me know where to send the money to (pre)pay for three cards.

.

[Flyboy]

Nice work Frank, you have done a good thing here, plenti gratitude to you.
Pity my lights have the on/off switch on the right side....damn

While you are about it, any chance of a set of gauge decals in clear, I have no doubt, the queue would be just as long.

[chuck hahn]

Stan...myself anf Frank had just had a good phone chat about exactly that. I proposed the clear decals for the 77 and 78 750s as I have a set of each guages to use as templates. And Frank..May want them to send you 5 or 6 cards with just a bunch of ignition switches because they will go on a good many bikes as well. Cut them off the cards per order to ship. Myself i would need 5 ignition switch decals.

[rustybronco]

Stan, If I remember correctly, someone has already made those decals you are referring to.

okay, as long as people are putting in requests for various decals, how about making the ones found on the chain guards.

here is a picture of a 1978 GS1000E fork decal.

for scaling purposes the decal is 58mm's high by 76mm's wide.