new mirrors

[Guest]

On my 1150 because I couldn't see anything but my arm in the stockers. These have integrated LED driving lites and a seperate signal lite. When I wired them up the park lites came on . When I pressed the turn signal they come on but don't flash. Any ideas? Different flasher maybe? The rears are still stock and the front stockers are disconnected. I may have to hook them back up.

[7981GS]

Those look sharp and like they belong there.
Hope that you figure out the wiring glitch.

Eric

[BassCliff]

Hi,

The stock flasher wants to see the stock load (resistance of the blinker bulbs). If the load changes (i.e. different bulbs) you'll have to get a different flasher relay. One of the cheap 2-prong can flashers might fit into the stock socket and work OK. Or you might have to wire in an off-the-shelf electronic flasher that doesn't care what the load is. More info can be found on my little website and by searching the forum. It's a very common situation.


Thank you for your indulgence,

BassCliff

[posplayr]

I would hook the stock fronts with the new LED's and it will all work and you will be more visable.

If you remove the front blinkers then do as Cliff says, to compensate for the light load of the LED's

Hope you got convex mirrors, they really help seeing behind your

[OLDENUFF]

I'll try hooking them all together first and yes they are convex. Thanks to all for the advice. Bob