Announcement

Collapse
No announcement yet.

Frank Z. Decals and a little spit and polish

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Frank Z. Decals and a little spit and polish

    Just wanted to post up a few pics from my build thread.

    Decals from Frank Z with Duplicolor Bumper paint. Look like new. Oh, and a little finger nail polish on the run/stop switch. Perfect match.






    The GS Syndrome kicked in. Polishing the float bowls as I restore and rebuild the carbs. Inspiration for the shot comes via Steve. The penny test.



    #2
    Frank Z decals...tell me more!
    sigpicMrBill Been a GSR member on and off since April 2002
    1980 GS 750E Bought new in Feb of 1980
    2015 CAN AM RTS


    Stuff I've done to my bike:dancing: 1100E front end with new Sonic springs, 1100E swing arm conversion with new Progressive shocks installed, 530 sprockets/chain conversion, new SS brake lines, new brake pads. New SS fasteners through out. Rebuilt carbs, new EBC clutch springs and horn installed. New paint. Motor runs strong.

    Comment


      #3
      Here's you go. Straight out of the "Parts and Services" area.

      I've produced these switch control decals to fit 1980/1981 GS 1100, 1000, and 850 series. Graphics and fonts are period correct, and are reproduced on 5-year vinyl with adhesive backs. Detail can be found on my Albums (http://www.thegsresources.com/_forum/album.php?albumid=1866&pictureid=9950) page. Item 1, Full Set


      Great guy and a great product. I'm impressed.

      Comment


        #4
        Originally posted by Good Times View Post
        Oh, and a little finger nail polish on the run/stop switch. Perfect match.
        OK, which one of the 97,000 shades of "red" did you use? That looks great.


        Originally posted by Good Times View Post
        The GS Syndrome kicked in. Polishing the float bowls as I restore and rebuild the carbs. Inspiration for the shot comes via Steve. The penny test.

        Looks good to me.


        We really need to do something about the hazardous conditions in our work shops.
        We both seem to trip while carrying aluminum parts and catch ourselves on the buffing wheel.

        .
        sigpic
        mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
        hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
        #1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
        #2 son: 1980 GS1000G
        Family Portrait
        Siblings and Spouses
        Mom's first ride
        Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
        (Click on my username in the upper-left corner for e-mail info.)

        Comment


          #5
          You're telling me Steve.

          I just hope OSHA doesn't show up. Ha!

          I'll take a picture of the finger nail polish. Got it from Wally World.

          Comment


            #6
            Okay thanks!
            sigpicMrBill Been a GSR member on and off since April 2002
            1980 GS 750E Bought new in Feb of 1980
            2015 CAN AM RTS


            Stuff I've done to my bike:dancing: 1100E front end with new Sonic springs, 1100E swing arm conversion with new Progressive shocks installed, 530 sprockets/chain conversion, new SS brake lines, new brake pads. New SS fasteners through out. Rebuilt carbs, new EBC clutch springs and horn installed. New paint. Motor runs strong.

            Comment


              #7
              I would show you a picture of my "Man Card" as well, but apparently I had to turn it in to buy this polish. I just saw that it's called "Heart to Heart." Hey, I love my bike.

              This is the polish I used:





              It just takes a really thin coat as not to clog the grooves and get all gunked up.

              Comment


                #8
                Thanks, will put that on the list, or at least will do that after seeing if Mrs. Steve has anything like that. She doesn't do a lot of fingernail coloring.

                .
                sigpic
                mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
                hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
                #1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
                #2 son: 1980 GS1000G
                Family Portrait
                Siblings and Spouses
                Mom's first ride
                Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
                (Click on my username in the upper-left corner for e-mail info.)

                Comment


                  #9
                  Those look great, I'll have to contact Frank Z soon and boy you and Steve know how to polish.

                  Comment


                    #10
                    This is what he said was his inpiration:



                    Not that these have anything to do with it.














                    .
                    sigpic
                    mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
                    hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
                    #1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
                    #2 son: 1980 GS1000G
                    Family Portrait
                    Siblings and Spouses
                    Mom's first ride
                    Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
                    (Click on my username in the upper-left corner for e-mail info.)

                    Comment


                      #11


                      Only you, Steve.
                      Dogma
                      --
                      O LORD, be gracious to me; heal me, for I have sinned against you! - David

                      Skeptical scrutiny is the means, in both science and religion, by which deep insights can be winnowed from deep nonsense. - Carl Sagan

                      --
                      '80 GS850 GLT
                      '80 GS1000 GT
                      '01 ZRX1200R

                      How to get a "What's New" feed without the Vortex, and without permanently quitting the Vortex

                      Comment


                        #12
                        Switches look great, Cory. Nice touch with the nail polish, too.

                        ... and MAN, those shiny bits!
                        '80 GS1000ST
                        '92 ZX-11
                        Past rides: '79 GS1000SN, '84 GPZ900R

                        http://totalrider.com/

                        Comment


                          #13
                          Originally posted by Frank Z. View Post
                          ... and MAN, those shiny bits!
                          That's why we need your "shiny bits", too.

                          Thanks for making them available.

                          .
                          sigpic
                          mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
                          hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
                          #1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
                          #2 son: 1980 GS1000G
                          Family Portrait
                          Siblings and Spouses
                          Mom's first ride
                          Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
                          (Click on my username in the upper-left corner for e-mail info.)

                          Comment


                            #14
                            Originally posted by Tech73 View Post
                            Those look great, I'll have to contact Frank Z soon and boy you and Steve know how to polish.
                            Get with him Tech. They are great for a restoration of the switches. I want to be just like Steve when I grow up.

                            Originally posted by Frank Z. View Post
                            Switches look great, Cory. Nice touch with the nail polish, too.

                            ... and MAN, those shiny bits!
                            Thanks Frank! I was really pleased at how forgiving the decals were. They stick really well but there's just enough give to position them before full contact. They also went on without any air bubbles. Thanks for providing the service and doing the R&D on them.

                            This is a little before and after with my work today. Still working on it, but they are going to look pretty good when I'm finished.

                            Comment


                              #15
                              Originally posted by Good Times View Post
                              This is a little before and after with my work today.
                              Looking good, Good Times. Is that body soda-blasted or some other finish?

                              .
                              sigpic
                              mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
                              hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
                              #1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
                              #2 son: 1980 GS1000G
                              Family Portrait
                              Siblings and Spouses
                              Mom's first ride
                              Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
                              (Click on my username in the upper-left corner for e-mail info.)

                              Comment

                              Working...
                              X